DC Arc Welding Inverter 200A, 9.5 KVA/Supplied with a Welding Helmet General View

DC Arc Welding Inverter, 200A, 9.5 KVA RH-4604

IGBT technology in the Ronix RH-4604 DC Arc Welding Inverter 200A helps customers improve welding quality and penetration, while decreasing energy consumption and boosting efficiency. Unbeatable automated short circuit current protection and simple ignition, resulting in a reduced amount of sparking and good performance at the surface of the corrosion, make the Ronix Rh-4604 an ideal choice. There is a 5mm MMA electrode that can be used with this power tool. Other features include protection against over voltage, heat, over current, and over load.
Hot start, anti-stick, reduced spark, and reliability make the RH-4604 a great welding equipment choice for new welders. For easier and better welding settings, the Ronix DC Arc Welding Inverter 200A is equipped with two volumes (Current and Arc Force), as well as a professional cooling system, which increases welding efficiency and allows for continuous welding. This inverter's digital display makes it easier to weld precisely. Scroll down to read the full description of this product!
    -IGBT technology for better welding quality, greater welding penetration, reduced energy consumption and increased efficiency
    -Unbeatable automatic short circuit current protection, easy ignition, less spark, provides excellent arc strike performance at rust surface
    -Run 5mm MMA electrode
    -Multi protection of over voltage, over heat, over current and over load protection
    -Hot start, anti-stick, less spark, reliable. Ideal welding equipment for entry-level welder.
    -Equip with 2 volumes (Current, Arc force) for easy and better welding setting 
    - Digital display provides highly accurate welding
    - Professional cooling system in order to increase efficiency and continuance welding

Product Videos

Specification

Model
RH-4604
Input voltage
220V± 15%
No-Load voltage
65v
Output Current range
30-200A
Rated Output Voltage
25.6V
Max Input Power Capacity
9.5 KVA
Max Input Current
43A
Power Factor
0.75
Duty Cycle
60%
Insulation Class
F
Protection
IP21S
Electrode Diameter
1.6 - 5.0
Accessories
Earth clamp+1.8m cable, Welding clamp +1.2m cable, Scotch brush+ Hammer, welding helmet

Average Ratings4.68

Power and Quality
0
4.78
5
4.78
Easy To Use
0
4.6
5
4.6
Safety
0
4.65
5
4.65
Easy To Care
0
4.69
5
4.69
Cost
0
4.66
5
4.66

Rate Product

NA
Power and Quality
0
0
5
NA
Easy To Use
0
0
5
NA
Safety
0
0
5
NA
Easy To Care
0
0
5
NA
Cost
0
0
5
NA
This field is required
Error verifying reCAPTCHA , Please try again
Ronix ToolsCategory