2730

Corded Rotary Hammer, 1100W, 5J

Write a review

The pull and push motion combined with the drilling function make an amazing combination. The most common usage of this combination is demolition, which requires digging or breaking down concrete walls. The numbers and characteristics that are able to create the best harmony between these functions and their usages are a high-power robust 1100W motor, 5J of impact energy resulted from industrially-designed hammering mechanism, max impact rate of 2600BPM, max speed of 750RPM and a durable 30mm SDS-Plus bit holder; all gathered inside a die-cast magnesium housing to achieve light weight, superior heat dissipation and enhanced body strength. 

These specifications belong to Ronix 2730 Rotary Hammer Drill which can be used to break down all types of concretes, blocks and tiles and you can use it in odd positions, as well. The drilling function mode in this amazing power tool should not be forgotten. But don’t expect to attach a picture frame on the wall by using 2730! It would be considered an offensive action against this muscular Ronix product!
Motor:
It is absolutely obvious that with the help of a rotary hammer drill like Ronix 2730, the usual one-hour drilling period goes down to only 5 minutes of “sweat-free” drilling time. That’s because its high-resistance, industrially-designed motor delivers real power of 1100W which is recommended for all kinds of industrial jobs. This robust motor is placed inside a rotary hammer drill and this means that it handles 3 specific operation modes, drilling, hammering and hammering with rotation. These functions are enhanced by the help of a full-metal high-resistance gearbox and a piston and cylinder forged and made of superior-quality alloy. As a result, the final numbers in BPM and RPM delivered by the motor and the hammering mechanism are max no-load speed of 750RPM and max impact rate of 2600BPM combined with 5J of impact energy. This means absolute power and strength.  
Mechanism:
The mechanism of our 2730 Rotary Hammer Drill is so simple. Just plug it into an outlet. Then, the power indication light turns on. Assemble the appropriate bit or chisel, choose the targeted function by using the mode selection knob and the chiseling function selector and finally, push the trigger with full power. If the hammering and rotary speed and power are too high or low, use the dimmer switch to increase or decrease the rotation speed. Its extraordinary demolition speed system can be absolutely effective during the process of working on masonry. While working with our 2730, the overload safety clutch system can protect armature and the safety of you as the operator of this power tool. But what is going on inside Ronix 2730 Rotary Hammer Drill?
A rotary hammer like 2730 creates its hammering action with a piston which is driven by a crankshaft. The piston rides inside a cylinder and creates air pressure when driven forward, and it is actually the air pressure that drives the hammer mechanism. The cylinder is made of strong high-resistance metal alloy and the piston and shaft are aluminum die-casted. Also, The NSK anti-dust ball bearings are included for more efficiency and higher durability.  The whole process is industrially engineered and manufactured by high-end machinery which is specialized by Ronix Design and R&D experts. 

Bit Holder:
The 30mm tool-free SDS-Plus bit holder is one of the most important parts only because of its direct and maximum contact with the workpiece. Its unique chisel rotation system is ergonomically designed to adjust hammering positions conveniently. The maximum capacity of this well-designed bit holder in wood is 40mm in diameter. This amount of capacity will reach to 30mm in concrete and 13mm in steel, and as it was mentioned before, these numbers are delivered inside the workpiece with max no-load speed of 750RPM and max impact rate of 2600BPM. Is there “anything else” that you could expect more from a power tool like Ronix 2730 Rotary Hammer Drill?  
Body:
When you look at Ronix 2730 Rotary Hammer Drill, you can see the die-cast magnesium body housing, the 360° anti-shock auxiliary Ronix-design handle, the double anti-vibration system and the power indication light. And, when you hold this amazing tool in your hands, you would definitely feel the result of magnesium housing which is light weight, superior heat dissipation and enhanced body strength. The auxiliary handle also provides a wide range of movement along with your comfort. The anti-vibration system reduces your hand fatigue and improves efficiency during your work. More importantly, the extensive soft grip of both handles on 2730 can be absolutely convenient and comfortable during long hours of working. The power indication light lets you know immediately when the cable breaks. The ergonomically-designed switches placed on Ronix 2730 Rotary Hammer Drill are whole another story! The mechanism of the trigger and the dimmer switch is quite obvious and by selecting the desired speed, you can have the most effective rotary and hammering motion of the bit. At last, the combination of the mode selection knob and the chiseling function selector will easily guide you to one of the three functions of Ronix 2730. 
Supplied inside a BMC Case, the package includes a grease bottle, a rubber protect cap, a spanner, the bits bag (which includes SDS-Plus drill bits 8*150, 10*150 and 12*150, SDS-Plus pointed chisel bit 250 and SDS-Plus flat chisel bit 14*250) and the Auxiliary Ronix-Design handle. 
When fitting a new window on a concrete wall, you need a clean job. It can also be a concrete ceiling, which is a very ridiculous position and would require so much time and energy. You definitely know that you would need a rotary hammer drill. By knowing all the features and specifications above, how much time do you need to decide on buying Ronix 2730 Rotary Hammer Drill?! Take all the time you need and then, we will be at your beck and call! 

Ronix 30 mm Rotary Hammer 2730 with information

Detailed Description

Motor

It is absolutely obvious that with the help of a rotary hammer drill like Ronix 2730, the usual one-hour drilling period goes down to only 5 minutes of “sweat-free” drilling time. That’s because its high-resistance, industrially-designed motor delivers real power of 1100W which is recommended for all kinds of industrial jobs. This robust motor is placed inside a rotary hammer drill and this means that it handles 3 specific operation modes, drilling, hammering and hammering with rotation. These functions are enhanced by the help of a full-metal high-resistance gearbox and a piston and cylinder forged and made of superior-quality alloy. As a result, the final numbers in BPM and RPM delivered by the motor and the hammering mechanism are max no-load speed of 750RPM and max impact rate of 2600BPM combined with 5J of impact energy. This means absolute power and strength. 

Mechanism

The mechanism of our 2730 Rotary Hammer Drill is so simple. Just plug it into an outlet. Then, the power indication light turns on. Assemble the appropriate bit or chisel, choose the targeted function by using the mode selection knob and the chiseling function selector and finally, push the trigger with full power. If the hammering and rotary speed and power are too high or low, use the dimmer switch to increase or decrease the rotation speed. Its extraordinary demolition speed system can be absolutely effective during the process of working on masonry. While working with our 2730, the overload safety clutch system can protect armature and the safety of you as the operator of this power tool. But what is going on inside Ronix 2730 Rotary Hammer Drill?

A rotary hammer like 2730 creates its hammering action with a piston which is driven by a crankshaft. The piston rides inside a cylinder and creates air pressure when driven forward, and it is actually the air pressure that drives the hammer mechanism. The cylinder is made of strong high-resistance metal alloy and the piston and shaft are aluminum die-casted. Also, The NSK anti-dust ball bearings are included for more efficiency and higher durability.  The whole process is industrially engineered and manufactured by high-end machinery which is specialized by Ronix Design and R&D experts.

Bit Holder

The 30mm tool-free SDS-Plus bit holder is one of the most important parts only because of its direct and maximum contact with the workpiece. Its unique chisel rotation system is ergonomically designed to adjust hammering positions conveniently. The maximum capacity of this well-designed bit holder in wood is 40mm in diameter. This amount of capacity will reach to 30mm in concrete and 13mm in steel, and as it was mentioned before, these numbers are delivered inside the workpiece with max no-load speed of 750RPM and max impact rate of 2600BPM. Is there “anything else” that you could expect more from a power tool like Ronix 2730 Rotary Hammer Drill

Body

When you look at Ronix 2730 Rotary Hammer Drill, you can see the die-cast magnesium body housing, the 360° anti-shock auxiliary Ronix-design handle, the double anti-vibration system and the power indication light. And, when you hold this amazing tool in your hands, you would definitely feel the result of magnesium housing which is light weight, superior heat dissipation and enhanced body strength. The auxiliary handle also provides a wide range of movement along with your comfort. The anti-vibration system reduces your hand fatigue and improves efficiency during your work. More importantly, the extensive soft grip of both handles on 2730 can be absolutely convenient and comfortable during long hours of working. The power indication light lets you know immediately when the cable breaks. The ergonomically-designed switches placed on Ronix 2730 Rotary Hammer Drill are whole another story! The mechanism of the trigger and the dimmer switch is quite obvious and by selecting the desired speed, you can have the most effective rotary and hammering motion of the bit. At last, the combination of the mode selection knob and the chiseling function selector will easily guide you to one of the three functions of Ronix 2730.

Supplied inside a BMC Case, the package includes a grease bottle, a rubber protect cap, a spanner, the bits bag (which includes SDS-Plus drill bits 8*150, 10*150 and 12*150, SDS-Plus pointed chisel bit 250 and SDS-Plus flat chisel bit 14*250) and the Auxiliary Ronix-Design handle.

When fitting a new window on a concrete wall, you need a clean job. It can also be a concrete ceiling, which is a very ridiculous position and would require so much time and energy. You definitely know that you would need a rotary hammer drill. By knowing all the features and specifications above, how much time do you need to decide on buying Ronix 2730 Rotary Hammer Drill?! Take all the time you need and then, we will be at your beck and call!

-High power, robust 1100W motor with 3 operation modes: Drilling, hammering and hammering with rotation strictly recommended for all kinds of industrial jobs

-Die-cast magnesium housing enables light weight, superior heat dissipation and enhances body strength

-360° anti-shock auxiliary Ronix-design handle provides a wide range of movement along with operator's comfort

-Double anti-vibration system reduces operator's fatigue and improves efficiency

-Unique chisel rotation system for adjusting hammering positions

-NSK anti-dust ball bearing for more efficiency and higher durability

-Electronic constant speed function for comfortable working in different operations

-Extraordinary demolition speed system can be absolutely comparable with leading brands in its level

-Extensive soft grip will reduce fatigue during long hours of working

-Overload safety clutch system can protect armature and ensures safety

-Power indication light lets you know immediately when the cable breaks

Specifications

Model
2730
Impact Energy
5J
Chuck Type
SDS Plus
Chuck Size
30mm
Power
1100W
Max Capacity In Wood
40mm
Max Capacity In Steel
13mm
Weight
5kg
Voltage
220V
Max Capacity in Concrete
30mm
Includes
Grease bottle, Rubber protect cap, Spanner, Bits bag includes (1)SDS plus drill bit 8*150,(1)SDS plus drill bit 10*150 ,(1)SDS plus drill bit 12*150, SDS plus point chisel bit 250, SDS plus flat chisel bit 14*250, Sclae bar, Auxiliary Ronix-design handle

Videos

play

Reviews

Mauricio Guida  

(10) (10)
1/19/2021

Perfect for hammer drilling for all types of material.

(10) (10)

Humberto Lenoir  

(10) (10)
3/30/2020

Its price in the market comparing to other brands is really reasonable. Thanks Ronix.

(10) (10)

Neal Caya  

(10) (10)
4/23/2020

Great power thanks. It includes different types of chisels and bits.

(10) (10)

Willis Bonfiglio  

(10) (10)
2/12/2021

Amazing power in demolition.

(10) (10)

Andrea Arant  

(10) (10)
1/13/2021

There are more powerful Ronix models. This one has a reasonable price and acceptable power. I have a 2740 and it’s great.

(10) (10)

Bud Powe  

(10) (10)
2/25/2020

This model can be a great choice if you are looking for a hammer drill with light weight and good power.

(10) (10)

Jamison Orosz  

(10) (10)
4/13/2020

It doesn’t have a safety clutch. It was almost killing me. Its demolition power is not even like a 2kg impact drill.

(10) (10)

Clay Burkley  

(10) (10)
5/10/2020

It is suitable for drilling and hammer drilling for all materials. But for heavy-duty concrete demolition it could be a little weak.

(10) (10)

Andrew Mellish  

(10) (10)
2/5/2021

I’m totally satisfied with it. I work on masonry every day and there is no problem about it.

(10) (10)

Darrel Guth  

(10) (10)
4/26/2020

The BMC case is okay. It is not what I expected but the tool itself is absolutely high in quality and power.

(10) (10)

Darrel Guth  

(10) (10)
7/11/2020

The BMC case is okay. It is not what I expected but the tool itself is absolutely high in quality and power.

(10) (10)

Mauricio Guida  

(10) (10)
4/23/2020

Perfect for hammer drilling for all types of material.

(10) (10)

Neal Caya  

(10) (10)
7/30/2020

Great power thanks. It includes different types of chisels and bits.

(10) (10)

Willis Bonfiglio  

(10) (10)
7/1/2020

Amazing power in demolition.

(10) (10)

Andrea Arant  

(10) (10)
3/29/2020

There are more powerful Ronix models. This one has a reasonable price and acceptable power. I have a 2740 and it’s great.

(10) (10)

Bud Powe  

(10) (10)
2/14/2021

This model can be a great choice if you are looking for a hammer drill with light weight and good power.

(10) (10)

Jamison Orosz  

(10) (10)
1/8/2021

It doesn’t have a safety clutch. It was almost killing me. Its demolition power is not even like a 2kg impact drill.

(10) (10)

Clay Burkley  

(10) (10)
6/7/2020

It is suitable for drilling and hammer drilling for all materials. But for heavy-duty concrete demolition it could be a little weak.

(10) (10)

Andrew Mellish  

(10) (10)
3/11/2021

I’m totally satisfied with it. I work on masonry every day and there is no problem about it.

(10) (10)

Humberto Lenoir  

(10) (10)
9/20/2020

Its price in the market comparing to other brands is really reasonable. Thanks Ronix.

(10) (10)

My Review For 2730

Rate Product (Total Average : 2.94 )

NA

NA
NA
NA
NA
NA