Ronix-product-detail-20219-24
Ronix-product-detail-10825-1
Driver Pin, 4.7mm
Model : RH-8047
: 4
Driver Pin, 4.7mm
Driver Pin, 4.7mm
Driver Pin, 4.7mm
Driver Pin, 4.7mm
Driver Pin, 4.7mm
Driver Pin, 4.7mm
Driver Pin, 4.7mm
Driver Pin, 4.7mm
Driver Pin, 4.7mm
Driver Pin, 4.7mm
Discontinued

Model : RH-8047 (4)

Driver Pin, 4.7mm

Bulk Order

-Very high firing power
-Nails made of hardened steel
-10-cartridge for nail guns
- with AISI 1060 standard
-Steel washers

 

We insert drive pin anchors into pre-drilled holes with a hammer blow. The Ronix RH-8022RH-8052 Drive Pins have been engineered to meet the toughness and durability requirements for penetrating structural steel and dense concrete. This nail gun set included ten cartridges in six different sizes, ranging from 2,2mm to 5,2mm, and was suited for both concrete and metal.

Model RH-8047
Size (mm) 4.7
Use Concrete
Downloads & Resources
Ronix-product-detail-10521-1

The Ronix RH-8022~RH-8052 Drive Pins series is designed for all type of fastening applications. The RH-8022 is suitable for metal and the rest are desired to used with concrete. Using best quality in the manufacturing process of these drive pins has made them an intellectual choice for where you need assurance of your fastening project. They have been made from special steel that is precision machined and specially hardened for heavy-duty operations.
If you have a basement and you want to put wood flooring/subfloor down, you can use drive pins for this purpose. By fixing softer materials such as wood or plywood, the washer increase pull-over strength. The pre-assembled steel washers has made them resistant to pull-over. The steel washers provide additional and increased bearing surface against the material to be fastened, which helps you to hammer down the nail with the washer flush to the surface.
Ronix has produced these drive pins based on the AISI 1060 standards, which is followed by many other manufacturers. The ASIS 1060 carbon steel is made from 98 percent of iron, 0.6 percent of manganese, and 0.5 percent of carbon. Carbon steels are steels containing carbon as the main alloying elements. There are also copper, aluminum, chromium, and molybdenum as residual elements in these steels.
The Ronix RH-8022~RH-8052 Drive Pins are supplied in 10pcs/strips which made them perfect for cartridge tools and nail guns. With red plastic collated cover, they are also easy to use by heavy-duty tasks where you need tons of nails to be installed. In order to reduce manual labor and increase productivity, Ronix has produced this series with different diameters: 2.2, 3.2, 3.7, 4.2, 4.7, and 5.2 millimeters. The 2.2mm (RH-8022) is proper for fastening into metal and the rest are suitable for concrete installations.
Whether you have construction, furniture, wood packing, decoration, or renovation, Ronix RH-8022~RH-8052 Drive Pins are designed to give many years of functionality and service for all you fastening operations. With a reasonable price, you can achieve the most out of a simple high-quality series of drive pins.

Review

Review this product

Share your thoughts with other customers

4
4
4
4
4
captchaImage

4