Electric Sander, 320W 6403

Motor & Mechanism

Ronix 6403 Electric Sander’s mechanism is simple but effective. There is a switch on the main handle which transfers the AC power to the motor forcing the gear to rotate. This rotation will be transferred to an aluminum plate using a crankshaft in the middle. 14000 circular tiny motions per minutes create a good vibration for all kind of sanding operations.    

Clampers

Ronix 6403 Electric Sander is equipped with a very effective set of spring-like clampers on both sides. Releasers are designed to be on opposite directions so the sanding paper stays in place properly. By releasing these clampers two biting jaws will be open on top and bottom of the sanding plate, ready to hold the abrasive paper as tight as possible. Once the paper is in place the operator is good to start sanding.

Body

6403 Electric Sander is well designed like all the other Ronix products. Ergonomic and smart design of the body makes this tool a light handy machine for one-handed operations. There is also a small extended grip along the main handle to make two-handed operations possible and gives the operator a better control. These two handles are covered with soft rubber to prevent fatigue and wrist injuries. The motor container is located exactly between two handles and you can find the vent slots on it to aid the cooling system. Aluminum plate on the bottom helps heat dissipation and ensures strength. Plastic holders attached to the plate will perfectly deliver the vibration from the shafts to the pad. This soft pad is screwed to the aluminum plate which then results in a smooth sanding operation.     

Switches

A red trigger is exactly where it should be on the main handle and all you need to do is pressing it to start the sander. Sanding is a time-consuming operation; that’s why Ronix came up with a lock key which keeps the tool on during long hours of operations and makes the sanding a lot easier.  

A good carpenter knows that the last step of burnishing is the most important one; that’s why a Ronix 6403 Electric Sander is what all woodworkers and carpenters need by their side in order to do all the sanding operations.