Model : 2704 (2.52)
Rotary hammer 1600w-36mm
-Durable, high efficiency 1600W motor with 3 operation modes: Drilling, hammering and hammering with rotation
-Die-cast aluminum housing enables light weight, superior heat dissipation and enhances body strength
-Double anti-vibration system reduces operator's fatigue and improves efficiency
-Unique chisel rotation system for adjusting hammering in 8 positions
-Anti-dust switch for reducing dust penetration and more convenient operation
-Dust proof and high-torque motor for using in construction site jobs
-High-torque safety clutch system can protect armature and ensures safety
| Model | 2704 |
| Impact Energy | 7J |
| Chuck Type | SDS Plus |
| Chuck Size | 36mm |
| Power | 1600W |
| Frequency | 50-60Hz |
| No-load RPM | 680 RPM |
| Weight | 4.9kg |
| Max Imapct Rate | 4200 BPM |
| Voltage | 220-240V |
| Supplied In | BMC |
| Max Capacity in Concrete | 36mm |
Ronix 2704 220v, 36mm SDS Plus Rotary Hammer Drill:
With a single tool, perform three distinct jobs: drilling, hammer drilling and demolition. Stay tuned to learn more about this versatile tool.Motor:
Ronix 2704 rotary hammer comes with a 1600W motor. A strong motor gives the device a speed of 680 RPM (revolutions per minute). The speed produced by the motor, the maximum impact rate of 4200 BPM (beats per minute) and the impact energy of 7J allow this machine to drive up to a depth of 45 mm in wood, 13 mm in metal and 36 mm in concrete. Use of NSK dust-free bearings also increases motor life, making it suitable for use in three distinct operations: drilling, hammer drilling and demolition. As tools become more powerful, user safety becomes more important than ever. The intensity of impact and rotation, while having the power to destroy things, can be hazardous to humans as well; so, the Ronix 2704 is armed with a safety clutch system.Gearbox:
The robustness of the gearbox and the strength of the aluminum housing are a few of the positive aspects of the 2704 rotary hammer. Tough metal gearbox housing is very durable under the pressure of boring and other demolition work. A dust switch on the main body of the gearbox allows the unit to be switched to the three functions of drilling, hammering and demolition, giving the user more control over the operation of the machine. Furthermore, this gearbox weighs very well for its stature, allowing the user to keep working for more hours.Bit Holder:
The Ronix 2704 rotary hammer is equipped with an SDS plus bit holder, a fast mechanism used for heavy-duty work. The advantage of the SDS mechanism is that it can accommodate larger diameter bits. The 2704 SDS-PLUS rotary hammer is designed to hold 36mm bits to increase the efficiency of the machine.Body:
A special shape of the Ronix 2704 helps the operator to get a better grip on the machine because of its light weight of 4.9 kg and the double anti-vibration system (AVS) in the handle. This anti-vibration system and the 360-degree anti-shock auxiliary handle fitted to the body limits the resulting vibrations of the 4200 beats per minute down to a safe level and avoids the possibility of the machine trembling easily in your hand. The grip of this unit is wrapped with high quality, non-slip, sweat-resistant rubber, that can also protect the unit from shifting in the user's hands.Accessories and packaging:
The Ronix 2704 Rotary Hammer Drill comes in a BMC box to be easily ported. The box contains a grease tube, 3 SDS Plus drill bits and 2 chisel bits, an auxiliary Ronix-design handle, and a protective rubber cap. There is also a scale bar to ease the measurements.Related Products
@Jamal Gasca Â
2020-01-25Truly impressive! haven’t been using it long but I really liked it.
@Cody Warriner Â
2020-06-02Usually I wait a year or so before doing a tool review but in the last 2 months I have chipped about 1000 tiles with this. I have drilled about 30 or so holes into concrete up to 5/8 no problems. It does get a bit hot so I give it a few mins to cool after about 20 mins of solid use. Not that it’s a problem just want my tools to last. I see this lasting a long time.
@Cecil Ake Â
2020-03-08Really nice job Ronix. This is a great tool at a reasonable price.
@Dario Prange Â
2021-04-02purchasing this SDS hammer drill hole drilling into hard concrete is quick and easy I didn’t have any difficulties using it.
@Jamal Gasca Â
2021-01-03Truly impressive! haven’t been using it long but I really liked it.
@Tristan Determan Â
2020-03-23It’s a waste of money. You can buy better ones with half-price.
@Nathan Greenstein Â
2020-09-17Works great light enough to pack and hike. Chews through the tough material even jade.
@Adrian Barbieri Â
2020-11-27It is not good for heavy works. Ugh …
@Darrel Stelle Â
2021-03-16It was really easy to use.
@Dan Custer Â
2020-01-04I want to make a different comment I would like to mention its great user manual. I always read the user manual to know about all the aspects. I found this one very helpful and clearly-written.
@Sonny Venson Â
2020-11-02I had another rotary hammer drill before and then I realized that I had to spend an extra money on one with anti-vibration technology to save my hands. So I bought 2704 and I am happy with it.
@Sonny Venson Â
2020-04-02I had another rotary hammer drill before and then I realized that I had to spend an extra money on one with anti-vibration technology to save my hands. So I bought 2704 and I am happy with it.
@Dario Prange Â
2020-03-12purchasing this SDS hammer drill hole drilling into hard concrete is quick and easy I didn’t have any difficulties using it.
@Cecil Ake Â
2021-04-19Really nice job Ronix. This is a great tool at a reasonable price.
@Nathan Greenstein Â
2020-06-26Works great light enough to pack and hike. Chews through the tough material even jade.
@Adrian Barbieri Â
2021-04-01It is not good for heavy works. Ugh …
@Darrel Stelle Â
2020-06-12It was really easy to use.
@Dan Custer Â
2020-08-27I want to make a different comment I would like to mention its great user manual. I always read the user manual to know about all the aspects. I found this one very helpful and clearly-written.
@Tristan Determan Â
2020-03-23It’s a waste of money. You can buy better ones with half-price.
Ronix Offices
@Cody Warriner Â
2021-01-15Usually I wait a year or so before doing a tool review but in the last 2 months I have chipped about 1000 tiles with this. I have drilled about 30 or so holes into concrete up to 5/8 no problems. It does get a bit hot so I give it a few mins to cool after about 20 mins of solid use. Not that it’s a problem just want my tools to last. I see this lasting a long time.