Ronix-product-detail-20219-24
Ronix-product-detail-10825-1
Rotary hammer 1200w-28mm
Model : 2729
: 2.6
28 mm Rotary Hammer ronix
Ronix-product-detail-10519-1
Ronix-product-detail-10519-2
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
28 mm Rotary Hammer ronix
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W
Rotary Hammer 28mm 1200W

similar model

2729 2701V 2724 2710 2702 8911k 2723 2708

Model : 2729 (2.56)

Rotary hammer 1200w-28mm

Barcode : 6942318620300

Bulk Order

High efficiency 1200W motor with 4 operation modes: drilling, hammer drilling, chiseling, and releasing
Die-cast magnesium housing enables light weight, superior heat dissipation and enhances body strength
360° anti-shock auxiliary Ronix-design handle provides a wide range of movement along with operator's comfort
Double anti-vibration system reduces operator's fatigue and improves efficiency
Unique chisel rotation system for adjusting hammering positions
Extraordinary demolition speed system can be absolutely comparable with leading brands in its level
Auxiliary handle will reduce fatigue during long hours of working
Overload safety clutch system can protect armature and ensures safety
Electronic constant speed function for comfortable working in different operations

When it comes to drilling into concrete or when you need a mini jackhammer, rotatory hammers are the answer. These tools are designed to deliver large amounts of impact force at a high rate, making them very effective for drilling through even aged concrete. Rotary hammers can be used for punching holes in concrete to allow for the passage of wires, cables, and bolts, while also being the perfect tool for demolition jobs. Ronix 2729 promises to not only deliver these capabilities but also improve upon them. And to keep that promise, Ronix has designed the 2729 rotary hammer to perform all of its tasks in a way that is comfortable for the user.
Model 2729
Power 1200W
Voltage 220-240V
Frequency 50-60Hz
No-Load Speed 1000RPM
Chuck Type SDS Plus
Chuck Size 28mm
Impact Energy 4.2J
Max Imapct Rate 4300BPM
Max Capacity In Wood 40mm
Max Capacity In Steel 13mm
Max Capacity in Concrete 28mm
Weight 4.6kg
packaging BMC
Accessories Grease tube, Rubber protect cap,Bits bag includes SDS plus drill bit 8, SDS plus drill bit 10 , SDS plus drill bit 12 , SDS plus point chisel bit , SDS plus flat chisel bit , Depth Guage , Auxiliary Ronix-design handle
Ronix-product-detail-10521-1
Ronix 2729, 1200W 28mm Rotatory Hammer is a 4.6 kg beast that has an impact energy of 4.2J, capable of drilling into wood, concrete, and steel with ease.  
Rotary hammers are among the toughest and most durable tools in the arsenal of professionals and construction workers. As such, Ronix has made its goal to design and deliver a robust rotatory hammer that’s capable of demolishing and drilling into any material. Equipped with a 1200-watt motor and a 28mm chuck, Ronix 2729, 1200W 28mm rotatory hammer is ready to join your tool armory. Keep reading to learn more about this product.  
Ronix 2729, 1200W 28mm rotatory hammer has an impressive no-load speed of 1000 RPM with a max impact rate of 4300 BPM which leaves no chance to any material that stands against it. This power tool’s 1200-watt motor works with 220V electricity (50-60Hz) which combined with a large cylinder, results in an impact energy of 4.2J. This means that by using this beast you can drill, chisel, and hammer drill without any worry about the hardness of the material at hand.  
Ronix 2729 rotatory hammer is built to work and hammer with no hassle. You just need to plug it in, choose one of the hammering modes using the selection knob, and start working by pushing the trigger. This device is equipped with a lock button switch for comfortable working in continuous operations. Using this feature, you can focus your energy on handling the device, rather than pushing the trigger during long operations.  
Made from die-cast magnesium alloy that enables lightweight and superior heat dissipation, Ronix 2729 is a 4.6 kg beast of a machine while being lighter than its competitors. Its improved heat dissipation system keeps the hammer cool for long sessions of work which expands its lifespan beyond any other model in the market. As rotatory hammers must be held in the operator’s hand for long hours, Ronix has armed its 2729 model with two anti-vibration handles. First, it is the main handle located and fixed in the back of the device and absorbs most of the vibrations caused by the device. You can also find the Ronix 2729 rotatory hammer’s trigger on this handle. The second handle, however, is an anti-shock auxiliary Ronix-design handle that can rotate 360 degrees and is located in the front of the device. This rotation-capable handle is especially handy in tight situations where you need to angle the machine.  
This monster hammer uses a 28mm SDS Plus bit holder and can drill into anything, but depending on the material, the drilling capacity varies. This rotatory hammer has a max drilling capacity of 13mm in steel, 28mm in concrete, and 40mm in wood. With this tool in hand, nothing can stand against you.  
Ronix 2729 rotary hammer is conveniently packed in a BMC box that contains not only the tool but also essential accessories such as a grease tube, spanner, and six bits of different sizes for drilling and chiseling. Additionally, the box includes an auxiliary design handle to facilitate comfortable usage of the tool, while the included rubber protective cap keeps the motor safe from wood chips and dust when the device is not in use.  
Review

@Marcellus Bolyard  

2020-02-28

This bubba is a beast it makes working with the concrete so easy.

Reply

@Emmett Macmillan  

2020-05-25

I had to drill about 64 holes into steel-reinforced concrete. I was able to drill all the holes without even a minute pause which I found impressive.

Reply

@Damon Sassano  

2020-07-16

Have been using a Ronix hammer drill until now. Since purchasing this SDS hammer drill hole drilling into hard concrete is quick and easy.

Reply

@Trevor Cannella  

2020-04-12

I gave up when using my regular hammer drill to drill through the basement wall 11 inches. My both arms hurt from shaking a lot. Got this rotary hammer drill in and it took me less than 5 minutes to drill a 1inch hole to another side of the basement wall. Just feel like you drill through the wood. Really nice job Ronix.

Reply

@Wilburn Mcknight  

2020-05-08

This is my new favorite tool. I ve mostly been using it to chip frozen ground (though the bit I was using wasn t the greatest) and it did that job very well. It really is built for almost any job. I was also breaking up larger pieces of concrete so I could transport them.

Reply

@Danilo Geer  

2020-06-11

This thing drilled through my block wall like a hot knife on butter. I went too fast. I mean I wasn t expecting how fast this rotary drill would work. I was expecting the results of a normal hammer drill and didn t realize the differences between a normal hammer drill and a rotary hammer drill.

Reply

@Emanuel Holleman  

2020-03-08

Great product for the price. Using it in my cellar on a bolder intruding into my bulkhead. Drilling holes is a snap with this product. Depth of 6 inches no problem. I am very satisfied with its performance and ease of handling.

Reply

@Esteban Swift  

2021-03-13

This is very heavy to work with!

Reply

@Donny Hoyos  

2020-05-07

It represents good value for the money.

Reply

@Antwan Fortney  

2021-04-15

There are ones with the more powerful motor but lower price why would I buy this one?

Reply

@Marcellus Bolyard  

2020-10-05

This bubba is a beast it makes working with the concrete so easy.

Reply

@Emmett Macmillan  

2020-09-20

I had to drill about 64 holes into steel-reinforced concrete. I was able to drill all the holes without even a minute pause which I found impressive.

Reply

@Wilburn Mcknight  

2021-03-08

This is my new favorite tool. I ve mostly been using it to chip frozen ground (though the bit I was using wasn t the greatest) and it did that job very well. It really is built for almost any job. I was also breaking up larger pieces of concrete so I could transport them.

Reply

@Emanuel Holleman  

2020-11-11

Great product for the price. Using it in my cellar on a bolder intruding into my bulkhead. Drilling holes is a snap with this product. Depth of 6 inches no problem. I am very satisfied with its performance and ease of handling.

Reply

@Esteban Swift  

2020-01-22

This is very heavy to work with!

Reply

@Donny Hoyos  

2021-03-10

It represents good value for the money.

Reply

@Danilo Geer  

2020-12-07

This thing drilled through my block wall like a hot knife on butter. I went too fast. I mean I wasn t expecting how fast this rotary drill would work. I was expecting the results of a normal hammer drill and didn t realize the differences between a normal hammer drill and a rotary hammer drill.

Reply

@Antwan Fortney  

2020-01-24

There are ones with the more powerful motor but lower price why would I buy this one?

Reply

@Damon Sassano  

2020-02-26

Have been using a Ronix hammer drill until now. Since purchasing this SDS hammer drill hole drilling into hard concrete is quick and easy.

Reply

@Trevor Cannella  

2020-11-19

I gave up when using my regular hammer drill to drill through the basement wall 11 inches. My both arms hurt from shaking a lot. Got this rotary hammer drill in and it took me less than 5 minutes to drill a 1inch hole to another side of the basement wall. Just feel like you drill through the wood. Really nice job Ronix.

Reply

captchaImage

Review this product

Share your thoughts with other customers

2
3
3
3
3
captchaImage

2.56