A Beginner’s Guide on How to Use a Cordless Drill

  • 10min
  • 12282
  • 0
A Beginner's Guide on How to Use A Cordless Drill

For newcomers, power tools might be scary.
You’re unsure where to begin, concerned about using the tool appropriately, and especially concerned about staying safe! Here’s a quick guide on How to Use a cordless drill and how to use them properly, including what they’re for, how they operate, which one you’ll need, and more!


Cordless Drill

What it’s good for

This tool may be used to drill holes in metal, plastics, wood, and stone, as well as drive screws with an electric screwdriver. A cordless drill driver, like any other cordless power equipment, offers the benefit of running on battery power. There will be no cable to trip over, and extension leads will not be moved about to give slack in the cable.

Without the hassle of the power flex catching in everything, a cordless drill may be utilized in unusual situations, up ladders, and on roofs. Another benefit is that a cordless drill is more balanced and easier to operate with one hand, which is especially useful for driving screws. Drills with cords are often top-heavy and difficult to use with one hand.

Picture of cordless drill.Use a Cordless Drill
Picture of cordless

How Cordless Drills Operate?

To learn How to Use a Cordless Drill , there are some general information you need to know.  The hand-tightening chuck on cordless drills is generally 3/8 inch (10mm) or 1/2 inch (13mm). Combi drills use a hammer motion that makes drilling holes in masonry easier. Battery voltages range from 10.8 to 36 volts in cordless drills. For drilling larger diameter holes, more voltage equals greater power and torque. Higher voltages, on the other hand, result in a heavier drill. A fair compromise is 14.4 or 18 volts.

Torque settings are available on cordless drills. When a predetermined twisting force or torque is given to a screw, the chuck will slide, preventing the screw from being over-driven into the wood.

Things to Consider:

Cordless drills, like corded drills, may have a low and high-speed setting. A gearbox controls the speed, and selecting a lower speed setting provides greater torque for drilling bigger diameter holes. If you need to use the drill to drive TEK screws (self-drilling screws for fixing metal cladding to metal or wood), choose a model with a maximum torque of at least 55 NM.

Best Cordless Drills for Beginners

Knowing How to Use a Cordless Drill is pointless if you don’t own a good tool and choosing one is extremely difficult. There are so many cordless drills on the market nowadays that determining which one is best for beginners may be tough. We’ll assist you by offering some of the top cordless drills on the market that are ideal for beginners.

Bosch PSB 1800

The Bosch PSB 1800 is one of the greatest cordless drills on the market, if not the best. It’s inexpensive, and it’s a beginner’s dream come true.

Bosch PSB 1800

This combo drill has a simple operation (just press the button and the drill will do the rest) and 20 pre-programmed functions to assist you with a variety of tasks, such as building furniture or hanging artwork.  There’s also an auto-lock keyless chuck to make changing bits a breeze, as well as an integrated work light that automatically turns on so you can line up your screw before drilling it in.  It also works with the same Bosch batteries as the rest of the line.

DeWalt DCD796P1 Cordless Drill

The DeWalt DCD796 is a versatile 18V cordless drill/driver/hammer drill that can handle any job.

It includes a large 5Ah battery with a long run-time (you can use a smaller battery to reduce the weight of the tool if necessary). The battery charges in 75 minutes, and the battery technology optimizes power to help you get more done in less time.

What else is there to say? The drill has 13 different torque settings and can drill through steel, stone, and wood. It boasts a high-quality, single-piece, all-metal chuck that can hold drill bits ranging from 1.5mm to 13mm in diameter and drills up to 13mm in steel, 13mm in masonry, and 40mm in wood.

DeWalt DCD796P1 Cordless Drill

It also offers three LED work light modes, which are very handy if you’re working in an area with little natural light.

Ronix 8612N
Ronix 8612N

Ronix 8612N Cordless Drill, 12V, 1500RPM

screwing. A high-resistant waterproof motor allows working in wet situations. Torque, measured in Newton-Meters (Nm), is the force that causes an object to rotate and is the best gauge to see how powerful your drill or impact driver is. The higher the number in newton-meters the more twisting force it will deliver.

By delivering 25N.m of torque, your 8612N Cordless Drill Driver will not have any issues during drilling and screwing through any surfaces like wood with the max drilling capacity of 25mm), plastic or metal (with the max drilling capacity of 10mm).

18 clutch settings enable efficient and accurate screwing and reduce fastener damage. The 2-speed function competent for both high-speed and high-power applications and the no-load speed of 0-400RPM (working with high power) and 0-1500RPM (working with high speed) helps the motor run efficiently.

How to Use a Cordless Drill

  • Examine the drill to become comfortable with the controls. The drill’s trigger will be on the handle, just below the drill body. A tiny circular button, the trigger lock, will be located near the trigger. Turn the drill upside down and search for the directional lever on the drill body right in front of the trigger or on the bottom of the drill handle. After you’ve found the direction lever, move it forward (F). insert the battery of your cordless drill.
  • From the drill bit set, choose a drill bit.
  • To close the chuck around the drill bit, hold the outside of the chuck and gently squeeze the trigger.
  • To lock in the drill bit in a keyed chuck, insert the alignment pin of the chuck key into one of the three holes on the chuck and spin the chuck key clockwise. To lock in the drill bit in a cordless chuck, grip the outside of the chuck hard and squeeze the trigger.
  • Place the 2-by-4 lumber in the vise and secure it.
  • Place the drill bit’s tip on the wood while wearing your safety glasses and slowly compress the drill’s trigger.
  • To withdraw the drill bit from the wood, depress the trigger and reverse the directional lever (R).
  • Before and after each usage, inspect the drill to ensure that none of the controls or components were damaged while it was in use.
Insert the bit into the cordless drill
Insert the bit into the cordless drill

How to Lock a Cordless Drill Bit

  • The following is a step-by-step guide on how to accomplish it:
  • In the drill chuck, place the drill bit.
  • Only use your hands to tighten the drill chuck until it clicks multiple times.
  • Return the chuck to its original position until you hear and feel a single click.
  • The drill bit is firmly secured into position after you hear and feel the last click.

 How to Keep Cordless Drill Battery for Longer?

  • Keep your cordless drill batteries charged by charging them as soon as you notice a drop in power. Most batteries survive the longest if they are recharged when they have reached 70% capacity. Even NiCd batteries (those with the “memory effect”) only need to be fully drained every month or so to keep their charge memory.
  • Battery should be used on a regular basis: When you don’t use your tools, the battery life reduces, so keep them in use! If you just use a tool once in a while, you might want to go for a plug-in model or prepare to recharge the cordless tool batteries before beginning a job.
  • Make Sure the Cordless Tool Battery Is Fully Charged: Make sure the cordless tool battery is fully charged. When the battery is fully charged, most chargers contain an indication to let you know.
  • Do Store Cordless Tool Batteries in a Dry, Climate-Controlled Environment: Cordless tool batteries will live longer if they are stored in a dry, climate-controlled area. Batteries, on the other hand, do not need to be kept in the freezer.
battery of cordless drill
  • Do Keep Your Cordless Tool Battery Safe: Keep your cordless tool battery safe by storing it in the original carrying case or a padded bag. To prevent short circuiting and to protect the terminals from damage or moisture, use the plastic cover that came with your battery.
  • Keep a backup battery on hand: It’s a good idea to have a second battery for your cordless tool charged and ready to go so you can switch out in the middle of a project.
  • Protect the battery by doing the following: Cordless tool batteries should be handled with care; if they are damaged or cracked, they will not operate.
  • Do make changes to your cordless tool settings: Use the appropriate tool setting for the job. Higher torque settings, for example, might deplete a cordless drill battery quicker, so you’ll get greater battery life if you utilize the required level.

FAQ

What is the function of a cordless drill?
This helpful gadget rotates the chuck with the help of a battery situated beneath the grip. The speed is controlled by the trigger, and the amount of pressure applied to the trigger may be adjusted. The motor transfers the battery’s electric power into energy that rotates the tip.

What does a drill’s number mean?
You’ll see a list of numbers ranging from one to ten or twenty. These are used to calibrate the clutch so that it can give a specific torque range. The greater the torque and the larger the fastener that can be driven, the higher the number on the collar.

Conclusion 📜

Although a cordless drill may appear to be a tool that only serious DIYers require, it is one that every homeowner (or renter!) should have on hand. Even the simplest cordless drill may make a big impact in routine activities around the house, having a simple “how to” guide on cordless drill not only helps you to go through your tasks with ease but can also assures the safety of the whole process of tackling DIY projects.

5/5 - (2 votes)

Ronix

13 December 2021

Leave a Reply

Your email address will not be published. Required fields are marked *

Related articles

subscribe to newsletter :

To subscribe to the newsletter and learn about the latest articles of Ronix magazine Enter your email.